New YouTube Video: Premiere Pro CC – Razor Tool Not Cutting Video and its Audio Track at Same Time

Recently I had an issue with the Razor Tool in Premiere Pro CC. It was not cutting the video and its associated audio at the same time, which is normal functionality. I think I must have inadvertently done something to make the Razor Tool cut only the track it was over. It would only cut the track that I was clicking on with the Razor Tool. This is similar to its functionality when holding down the ALT key.

After some research I found how to set the Razor Tool back to default behavior. I also found how to deal with a video that had a segmented audio track, where the audio track needed to be re-linked to the video.

This video shows the issue I was having and how I resolved it, as well as how to link and unlink audio segments to a video track.

How I Setup my Wacom Intuos Pro Small


I recently bought a Wacom Intuos Pro small tablet. Because my laptop has a touch screen, there were a few configuration steps I needed to do to enable the pen. This blog is mostly for me in case I ever need to do a fresh install on my system and those steps will be readily available.

I also want to share why I finally decided to get a Wacom after thinking about it for a few years. I will also share some customization that can be done on the tablet and pen buttons.

I held off getting a Wacom because I felt that they were more for digital artists. Though I would like to get a bit more into drawing, I am no where near the point where I would need anything more than pencil and paper. Think stick figures.

Recently, I started watching Sara Dietschy’s vlogs (please check out her YouTube channel, especially the Casey Neistat-related videos) and she did a comparison of the Wacom Intuos medium-sized Intuos 5 tablet with the Intuos Pro small tablet:

I liked that the Intuos Pro small tablet could fit in a laptop backpack. Sara uses it for Photoshop, Premiere Pro for editing, and for AfterEffects, which are the programs I will use it for. Please note that Sara does not do digital art either, and that is something to keep in mind. If you are doing art on your computer, using something like Illustrator, Manga or Anime Studio, or any other digital art application, you may want to go with the bigger Wacom.

At this point I looked at a few YouTube videos about using the Wacom with Premiere and AfterEffects, which finalized my decision to get it. As of this writing, I have only had it for about four days and still need to learn how to actually use it. I don’t think the learning curve is going to be too bad, and once I get the hang of it I know I am going to love it.

As I mentioned above, when I first setup my Wacom I had a few minor issues that were very easy to correct.

The first was the software that came with the Intuos. A CD was included with the software on it, but I wanted to download and install it from the Wacom website to insure I had the latest version. There was a point where it asks for the Software Bundle download key, and that is on a sticker on the back of the CD envelope. Make sure you install the software bundle because it includes the Wacom Tablet Properties program that allows you to customize the tablet and pen buttons.

After installing the software, I noticed that the pen option was not showing up in the Wacom Tablet Properties program:

No Pen

I believe this was happening because I have a laptop with a touch screen running Windows 10. I found a video by Adam Duff at LUCIDPIXUL with the steps to correct this. Please note that much of Adam’s video has to do with an issue he was having specifically in Photoshop. It is the last corrective action that he takes around the 7:23 mark that fixed my issue of the pen option not showing in properties. I will list those steps below as well.

The steps that I took based on Adam’s video were:

Right-click the start button and select search.


Using either standard search or Cortana, search for “pen and touch”. If you use standard search be sure to select that you want to search in Settings. Click on the Pen and Touch result.

Search Results

From the Pen and Touch window, select Press and Hold and click settings:

Press and Hold Settings

Uncheck the checkbox for Enable Press and hold for right-clicking, then click OK.

Uncheck enable press and hold

Then from the Pen and Touch window, select the Flicks tab and uncheck the checkbox for Use flicks to perform common actions quickly and easily, then click OK.


After I did these steps, the pen option appeared in the Wacom Tablet Properties program:

Pen appears

Now I was ready to customize my tablet and pen buttons. The first video I looked at was posted on the Wacom YouTube channel, but was done by Photoshop experts Phlearn (please check out their YouTube Channel as well):

The Wacom/Phearn video covers customizing the buttons on the pen, as well as the buttons and scroll wheel on the tablet. My favorite has to be setting up the back button on the pen to be Undo:

From the Wacom Tablet Properties program, make sure that you are in the pen option, then click the dropdown associated to the pen’s back button:

pen dropdown

Select keystroke from the dropdown menu:

Select keystroke

The Define Keystroke will be displayed. With your cursor in the Keys box, do Ctrl+Z (hold control button down and tap Z). Then in the name field enter Undo. Click OK. Now when using your Wacom you can click the back button on the pen and it will perform the Undo function. I know this is one I will be using a lot.

The next video I want to share is by Pxlpainter and how they setup their Wacom for use with AfterEffects. One of the things I want to call out is around the 1:30 where he shows how to configure the settings for all applications, or do settings for a specific application. So you can have the buttons and scroll wheel customized a certain way for one program, like Premiere Pro, but have them configured a different way when you are in another program, like Photoshop or AfterEffects.

I will share my progress with the Wacom in future posts, including any tricks or custom configurations I come across.

Using My iPhone to Edit and Post a Video to YouTube

Last week I did a story on my Snapchat about my Vlogging camera, an Olympus T860. I liked how it came out so I wanted to put it on my YouTube Channel

The first thing I did was to save my Snapchat story on my iPhone before it expired and disappeared forever. Stories disappear after 24 hours.

Normally, I would copy the video from my iPhone to my computer. Then I would edit it in Adobe Premiere Pro CC and upload it to YouTube. But I wanted to see if I could edit everything on my iPhone and have the final result be close to what I was able to do on my computer.

If everything worked okay – and without a lot of hassle – I would know that I could do YouTube videos “on the fly”. I would like to increase my YouTube output in 2016, and being able to shoot, edit and upload videos when I was away from my computer would help with that.

Since I had been thinking about this for a while, I already had copies of my intro, outtro and additional credits placards .JPGs on my iPhone. These are title cards with my channel and social information on them.

Also, I had already downloaded music tracks from YouTube Audio Library to my computer. I used iTunes to load them on my iPhone. Tip: If you do this, add them to a separate Playlist (I called mine “YouTube”) so you can find and review them quickly.

I used the One Stop Photo Notes app to add titles and text to my intro, outtro and credits placards.

Now I was ready to edit. I used the Videoshop app for this. I imported the Snapchat story video into the app. The app has cut and trim functions, but I found the split video function to be more accurate. That could be just me, though.

Once I had the video split out into different scenes, it was easy to arrange them in the order I wanted by dragged and dropping them on the timeline. The YouTube video has some scenes in a different order than they were in the Snapchat story, but they flow much better. I also cut one scene that was also a total copy of another one.

I added the placards and the music next. It took me a few tries to figure out the volume control for the music. There is a little music note symbol on the timeline. Tapping it brought up the volume control, so I was able to lower the music so it did not overwhelm the voiceover.

I reviewed and adjusted the video many times, then saved it to my camera roll. At this point I used the YouTube app to upload the video to my channel.

The video came out well, but I did learn a few things:

First, the overall volume on the video was a bit low. I will increase it on the next video I do this way.

Second, I need to keep a copy of my show notes template on my iPhone. This is a document that has the info I always want in my video’s discription. This includes the general layout, all of my social media links, production notes (camera used, program edited on, etc.) and so on.

Third, I don’t think the YouTube app has as much functionality as the web version does. I need to dive into this more, but I have not found things like ad setup on it.

I plan to go onto the web version of YouTube and update the things I was unable to do or missed on the YouTube app.

Overall, I consider this expirement to be a total success. It was relatively easy to do everything from my iPhone. Now I know that if I want to do a quick video and post it right away I can, and it will have quality near to what I can do on my computer. I will still do the majority of my editing and uploads from my computer, but it is nice to have this option, especially when I am out and don’t have my computer with me.

Note about the blog post: In keeping with its theme, this blog post was written and posted from my iPhone. I used the Textastic app to write it and the MediaFire app to upload the pictures for it.

Adobe AfterEffects – Some Initial Thoughts and Composites

A few months ago I downloaded and subscribed to Adobe Creative Cloud. The main reason was to learn After Effects, which I have been interested in for years. I am barely scratching the surface, have so much more to learn, but I absolutely love it. This is the kind of stuff that I dreamed of doing as a kid – and an adult – and now will be able to do on a laptop.

I will post on my progress, share any cool tips I come across, and share some of the videos I do. I will also share links to books and videos that I learn from.

First of all, the main book I have been reading is Adobe After Effects Classroom in a Book.

AE Classroom in a Book

I really like this book. Very easy to follow, covers major concepts, and there are downloadable work files for every chapter.

The first thing I am trying to learn is sign replacement. As I mentioned in an earlier post, I am a huge fan of director Gareth Edwards, the director of Godzilla. Mr. Edwards was an effects artist and he did his first film “Monsters” on a micro budget. In the DVD “making of” featurette, he talked about how doing simple sign replacements via After Effects was a great way to add production value. It was also much easier and cheaper than creating actual signs. I thought that was a really cool idea.

My first attempt was to replace a poster for The Purge: Anarchy in a bus stop display with another poster. I decided to replace it with a fan art poster for the classic Simpsons musical “Stop the Planet of the Apes, I Want to Get Off” by DJ Clulow.
Simpsons Apes

A Word on the Simpons Apes Poster: I came across the image online and thought it was amazing. It is from one of my favorite episodes and I thought the artist just nailed it. I found out that it was done by DJ Clulow and I immediately bought a print from DJ’s Etsy. When I thought I might post my progress videos on YouTube, I reached out to DJ first who kindly gave me permission to use the poster in them. Please be sure to checkout all of DJ’s work at

To replace the poster in the bus stop I used the multi-point tracking method covered in Adobe After Effects Classroom in a Book. The Purge: Anarchy poster was actually perfect for this, because it has a very bright background. That contrasted well with its black frame. My understanding is that this kind of sharp contrast helps After Effects maintain the points once set.

Here is the video of the bus stop sign replacement. It includes the original footage followed by the Apes poster composited into it:

Next, I wanted to do a sign replacement panning shot. For this I used the 3D camera tracking method in After Effects. Adobe After Effects Classroom in a Book had some great info in it, but I found watching YouTube videos on how to do this the most helpful. Here are two of the videos I watched:

The first video is about replacing an image on a computer screen. I modified my steps a little for the poster, such as the ratio/dimesions for the image I was using. Note that the version of After Effects used in this video is CS6, but I found the steps worked in my CC 2014 version just fine:

The second video has a lot of tips for cleaning up the 3D points to get better tracking. Also, though I did not use it for my video, it includes a way to create your own sign from within After Effects. That is something I will definitely do in the future.

Here is my video using the 3D camera tracking. Again, I replaced the poster for The Purge: Anarchy (Nothing against The Purge: Anarchy at all. In this case it was next to the poster for Dawn of the Planet of the Apes so that’s where Simpons Apes had to go. What a great double feature that would be!).

I think this was good, but the rotoscoping of the Now Showing sign definitely needs work. The edges are not sharp and has almost a fluttering, flashing effect to it. I think the reason for this is that I used the rotoscope brush. I think, but I am not sure, that the rotoscope brush may be better for selecting people or free moving objects. For the Now Showing sign it might be better to do something where I have more defined edges (maybe the pen tool??). This is definitely something I am still figuring out, but when I do, I will post an updated video.

Thanks again to artist DJ Clulow. The Simpsons Apes poster can be purchased on DJ’s Etsy. If you are an “It’s Always Sunny in Philadelphia” fan, there is also an awesome poster for “The Dayman Cometh”.